The difference with the bottom panel light and the side-emitting panel light

The bottom panel light adopts the LED light-emitting angle, high lumen, 595*595 specifications can reach 4000lm, is a high light efficiency products, replacing traditional side-emitting panels. Thicker, usually over 45mm thick. The light output is relatively uniform, and the brightness uniformity can reach more than 0.9.

The side-emitting panel light adopts the light guide plate technology, The brightness is low, and the 595*595 specification is generally within 3000lm; it can be used in some occasions with low ceilings. Thinner, the thickness is within 15mm. The surface uniformity is poor, and the brightness uniformity reaches 0.85. If it is not handled well, there will be obvious bright edges around it. It is required the workshop is cleaning, if the process control is not good, and the defective rate will be high.